Metal Roof vs Shingles Cost
Metal costs more upfront. Whether it's worth it depends mostly on how long you'll own the home.
Upfront cost on a 2,000 sq ft roof
| Architectural shingles | Metal | |
|---|---|---|
| Installed, per sq ft | $5.00 โ $8.50 | $8.00 โ $14.00 |
| 2,000 sq ft roof, before tear-off | $10,000 โ $17,000 | $16,000 โ $28,000 |
| Typical lifespan | 20โ30 years | 40โ80 years |
Lifespans per Thumbtack, which also reports averages of about $12,100โ$14,300 for shingles and $19,600โ$22,100 for metal on a 2,500 sq ft roof.
Cost per year of roof life
Take a midpoint of each range and divide by a middle lifespan:
- Shingles: about $13,500 รท 25 years โ $540 a year.
- Metal: about $22,000 รท 50 years โ $440 a year.
So metal can be cheaper per year, but only if you stay long enough to get the benefit. If you'll sell within 10 years, shingles usually make more sense.
Other differences
- Heat: metal reflects much more sunlight, which can lower cooling bills in hot climates.
- Snow and fire: metal sheds snow easily and doesn't burn.
- Noise: rain noise is rarely an issue over a solid deck and attic insulation.
- Repairs: shingles are cheap and easy to patch; metal panels need a specialist.
- Looks and HOA rules: some neighborhoods restrict metal roofs.
See all materials side by side on roof cost by material, or price your own roof with the calculator.
More roof cost guides
- Roof cost calculator
- By material
- Per square
- Measure a roof
- By house size
- Tear-off cost
- Overlay vs tear-off
- Decking cost
- How long it takes
Frequently asked questions
How much more does a metal roof cost than shingles?
On a 2,000 sq ft roof, metal runs about $16,000โ$28,000 installed versus $10,000โ$17,000 for architectural shingles, before tear-off: roughly 1.6 to 1.7 times as much.
Is a metal roof worth the extra cost?
It often is if you'll stay 20+ years, because it can last two to three times as long. For a short stay, shingles usually give better value.
Can a metal roof go over shingles?
Often yes, with the right underlayment or battens and if local code allows it, which can save the tear-off cost.