🏡 AbodeCalc›All calculators

Multi-Zone Mini Split Sizing

A multi-zone system has one outdoor condenser and several indoor heads. Size each head for its own room, then pick an outdoor unit that can carry the combined load.

Step 1: Size every room separately

Use the calculator and add one row per room. Each room gets its own BTU number and head size. Don't share one head between two closed rooms. Air won't reach the second room well.

Step 2: Add up the heads

The calculator totals all rooms. Many outdoor units are rated to connect more indoor capacity than their own rating (often up to about 130%), because rooms rarely peak at the same time. Check the manufacturer's combination table for the exact limits.

Step 3: Watch the minimum head size

Small rooms like a 100 sq ft office only need about 5,000 BTU, but most wall heads start at 6,000–9,000 BTU. An oversized head in a small room short-cycles. Consider a ducted or ceiling-cassette head serving two small adjacent rooms, or a single-zone unit for that room.

Example: 3-bedroom setup

RoomLoadHead
Living room 18×209,000 BTU9k
Primary bedroom 14×166,000 BTU6k–9k
Bedroom 12×125,000 BTU6k
Total20,000 BTU18k–24k outdoor unit

Frequently asked questions

Can I connect more indoor BTU than the outdoor unit's rating?

Often yes, within the manufacturer's combination limits, because not every room needs full cooling at once. Always follow the specific model's connection table.