🏡 AbodeCalc›All calculators

Mini Split Size Calculator

Find the right mini split size for every room. Enter the room dimensions, sun exposure and how the room is used, and get the BTU you need plus the standard unit size to buy.

Your rooms

Recommended cooling capacity
–
Total area–
Tons–
Zones–

How the calculator sizes your mini split

  1. Room area. Length × width gives the square footage. The capacity comes from the ENERGY STAR sizing guidance chart, which matches room area to BTUs per hour.
  2. Sun and shade. A very sunny room gets 10% more capacity. A heavily shaded room gets 10% less.
  3. People. Add 600 BTU for every person beyond two who regularly uses the room.
  4. Kitchens. Cooking adds heat, so kitchens get an extra 4,000 BTU.
  5. Ceiling height. The chart assumes 8-foot ceilings. Taller ceilings scale capacity up proportionally.
  6. Unit size. Mini split heads come in standard sizes (6k, 9k, 12k, 18k, 24k BTU and up). We round up to the nearest size.

Quick mini split size chart

Room sizeCooling capacityTypical mini split size
100 – 150 sq ft5,000 BTU/h6,000 BTU (0.5 ton)
150 – 250 sq ft6,000 BTU/h6,000 BTU (0.5 ton)
250 – 300 sq ft7,000 BTU/h9,000 BTU (0.75 ton)
300 – 350 sq ft8,000 BTU/h9,000 BTU (0.75 ton)
350 – 400 sq ft9,000 BTU/h9,000 BTU (0.75 ton)
400 – 450 sq ft10,000 BTU/h12,000 BTU (1 ton)
450 – 550 sq ft12,000 BTU/h12,000 BTU (1 ton)
550 – 700 sq ft14,000 BTU/h15,000 BTU (1.25 ton)
700 – 1,000 sq ft18,000 BTU/h18,000 BTU (1.5 ton)
1,000 – 1,200 sq ft21,000 BTU/h24,000 BTU (2 ton)
1,200 – 1,400 sq ft23,000 BTU/h24,000 BTU (2 ton)
1,400 – 1,500 sq ft24,000 BTU/h24,000 BTU (2 ton)
1,500 – 2,000 sq ft30,000 BTU/h30,000 BTU (2.5 ton)
2,000 – 2,500 sq ft34,000 BTU/h36,000 BTU (3 ton)

Full details and more examples: mini split BTU chart.

Why the right size matters

Bigger isn't better. An oversized unit cools the room fast, then shuts off before it removes humidity, so the room feels clammy and the compressor short-cycles. An undersized unit runs nonstop on hot days and never catches up. Modern inverter mini splits can modulate down, which gives some margin, but sizing close to the load still gives the best comfort and efficiency.

Frequently asked questions

What size mini split do I need for 500 square feet?

About 12,000 BTU (a 1-ton unit) for a typical room of 450–550 sq ft with 8-foot ceilings, per the ENERGY STAR chart. Add 10% for a very sunny room or 4,000 BTU for a kitchen.

How many BTU per square foot for a mini split?

Roughly 20 BTU per square foot for average rooms, but the ratio falls as rooms get bigger. That's why the calculator uses the ENERGY STAR area chart instead of a flat number.

Is it better to oversize a mini split?

Not much. Oversizing causes short cycling and poor humidity control. Inverter models tolerate a little extra capacity, so round up to the next standard size, not two sizes up.

Does this work for heating?

The chart is for cooling. In cold climates, size for your heating load too and check the unit's rated capacity at your winter design temperature. A pro Manual J calculation is best for whole-home heating.